Loading...
> >

A well a bird bird flew off with my complaint thread

1…1617192122…50

Comments

  • DanaTADanaTA Posts: 13,265
    edited December 1969

    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4

    Are you using a UK version of Windows?

    Dana

  • MistaraMistara Posts: 38,675
    edited November 2013

    baffled by intersect, hd'scrch

    was hoping it cut a path through those in between edges to connect those 2 verts in a straight line.

    pick a plane?


    omg, potato/peas samosas soo spicy, hot hot,

    about time for an ice cream break. :)

    intersect.jpg
    442 x 864 - 79K
    Post edited by Mistara on
  • kyoto kidkyoto kid Posts: 41,260
    edited December 1969

    DanaTA said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4

    Are you using a UK version of Windows?

    Dana
    ...heh, always spelled it that way. Most of my software that supports alternate dictionaries is set to UK English.

  • frank0314frank0314 Posts: 14,330
    edited December 1969

    DanaTA said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4

    Are you using a UK version of Windows?

    Dana

    That is a weird way to spell program

  • ChoholeChohole Posts: 33,604
    edited November 2013

    Frank0314 said:
    DanaTA said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4

    Are you using a UK version of Windows?

    Dana

    That is a weird way to spell program

    Programme or Program

    Who invented the English language anyway. :coolsmile:

    Post edited by Chohole on
  • TJohnTJohn Posts: 11,228
    edited December 1969

    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4


    1. Did you install the previous version via the DIM? I did.
    2. If you look under Settings(the gear)/Applications in DIM, what do you see? See image below - this is what I see.
    3. Does your computer really use the British spelling for "program"? (not essential to answer :) )

    I can't guarantee results, but I can tell you that this worked for me. I have used the DIM to install 2 previous versions of 4.5+. In each instance the earlier version was replaced successfully and this time was no exception.

    DIMCapture.JPG
    562 x 529 - 41K
  • TJohnTJohn Posts: 11,228
    edited December 1969

    chohole said:
    Frank0314 said:
    DanaTA said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4

    Are you using a UK version of Windows?

    Dana

    That is a weird way to spell program

    Programme or Program

    Who invented the English language anyway. :coolsmile:
    Some guys at Oxford...or maybe Webster...

    Webster.jpg
    393 x 594 - 75K
  • TJohnTJohn Posts: 11,228
    edited December 1969

    Kulay Wolf said:
    Kyoto Kid said:
    ...wouldn't that mess up the drive?

    I better try to get it off of the disc. The pudding is now dried on it which will make it a tad hard to remove. Any ideas of how to remove dried pudding from a disc. It is only on one size and that is the label but not on the read write area.
    "Chocolate pudding can be removed from a compact disc by one of the following methods:
    1. Hammer and chisel
    2. Belt sander" - The Bad Advice Handbook

  • DanaTADanaTA Posts: 13,265
    edited December 1969

    tjohn said:
    Kulay Wolf said:
    Kyoto Kid said:
    ...wouldn't that mess up the drive?

    I better try to get it off of the disc. The pudding is now dried on it which will make it a tad hard to remove. Any ideas of how to remove dried pudding from a disc. It is only on one size and that is the label but not on the read write area.


    "Chocolate pudding can be removed from a compact disc by one of the following methods:
    1. Hammer and chisel
    2. Belt sander" - The Bad Advice Handbook

    Sounds like it would be a funny read, that handbook. ;-)

    Dana

  • kyoto kidkyoto kid Posts: 41,260
    edited November 2013

    tjohn said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4


    1. Did you install the previous version via the DIM? I did.
    2. If you look under Settings(the gear)/Applications in DIM, what do you see? See image below - this is what I see.
    3. Does your computer really use the British spelling for "program"? (not essential to answer :) )


    I can't guarantee results, but I can tell you that this worked for me. I have used the DIM to install 2 previous versions of 4.5+. In each instance the earlier version was replaced successfully and this time was no exception.
    ...yes it shows the same, but don't I have to specify the install path like I do with DS and Ps content or does it automatically know where to install the update (and dos it uninstall the previous version beforehnd)?

    Post edited by kyoto kid on
  • MistaraMistara Posts: 38,675
    edited December 1969

    woot Saturday night. wilder with hot cocoa and marshmallows.

    row row row your boat ... -is the song code for a sex thing?

  • frank0314frank0314 Posts: 14,330
    edited December 1969

    Misty Whisky said:
    woot Saturday night. wilder with hot cocoa and marshmallows.

    row row row your boat ... -is the song code for a sex thing?

    That sounds good

  • TJohnTJohn Posts: 11,228
    edited December 1969

    Kyoto Kid said:
    tjohn said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4


    1. Did you install the previous version via the DIM? I did.
    2. If you look under Settings(the gear)/Applications in DIM, what do you see? See image below - this is what I see.
    3. Does your computer really use the British spelling for "program"? (not essential to answer :) )


    I can't guarantee results, but I can tell you that this worked for me. I have used the DIM to install 2 previous versions of 4.5+. In each instance the earlier version was replaced successfully and this time was no exception.


    ...yes it shows the same, but don't I have to specify the install path like I do with DS and Ps content or does it automatically know where to install the update (and dos it uninstall the previous version beforehnd)?
    Does your Settings/Installation pane in the DIM look like this? (The part about installing 64 bit and 32 bit programs)
    When the new version installed to my computer it removed the old version and installed the new one. I am going by the fact that there is only one version of DS on my computer.
    DIM2Capture.JPG
    566 x 531 - 59K
  • kyoto kidkyoto kid Posts: 41,260
    edited December 1969

    tjohn said:
    Kyoto Kid said:
    tjohn said:
    Kyoto Kid said:
    ...but which path do I set it to?

    C:/Programme Files

    C:/Programme Files/Daz3D

    C:/Programme Files/Daz3D/DAZStudio4


    1. Did you install the previous version via the DIM? I did.
    2. If you look under Settings(the gear)/Applications in DIM, what do you see? See image below - this is what I see.
    3. Does your computer really use the British spelling for "program"? (not essential to answer :) )


    I can't guarantee results, but I can tell you that this worked for me. I have used the DIM to install 2 previous versions of 4.5+. In each instance the earlier version was replaced successfully and this time was no exception.


    ...yes it shows the same, but don't I have to specify the install path like I do with DS and Ps content or does it automatically know where to install the update (and dos it uninstall the previous version beforehnd)?
    Does your Settings/Installation pane in the DIM look like this? (The part about installing 64 bit and 32 bit programs)
    When the new version installed to my computer it removed the old version and installed the new one. I am going by the fact that there is only one version of DS on my computer.
    ...yes.

    There was someone on the update thread who mentioned that he ended up with two versions of 4.6 (both .1.17 and .1.33) in different locations in the same folder tree after installing which corrupted everything. That is why I held off installing until I could get this figured out.

  • TJohnTJohn Posts: 11,228
    edited December 1969

    Frank0314 said:
    Misty Whisky said:
    woot Saturday night. wilder with hot cocoa and marshmallows.

    row row row your boat ... -is the song code for a sex thing?

    That sounds good
    The hot cocoa w/marshmallows or the "sex thing"? :)

  • starionwolfstarionwolf Posts: 3,670
    edited November 2013

    The content management system and smart content for Sutdio 4 did not work on my computer if I installed in another folder or hard drive.

    Post edited by starionwolf on
  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Morning. Perfect sunny day, big blue sky and shirtsleeves warm so far :)

  • TJohnTJohn Posts: 11,228
    edited December 1969

    Kyoto Kid said:


    ...yes.

    There was someone on the update thread who mentioned that he ended up with two versions of 4.6 (both .1.17 and .1.33) in different locations in the same folder tree after installing which corrupted everything. That is why I held off installing until I could get this figured out.


    Right. I saw that too and it made me a bit uneasy as well, but there were reassurances from Admins and others so I took the risk.
    I don't know why things glitched for that one user, I haven't seen a post from someone else who had a problem yet.
  • TJohnTJohn Posts: 11,228
    edited December 1969

    starionwolf said:
    The content management system and smart content for Sutdio 4 did not work on my computer if I installed in another folder or hard drive.

    Yes, those appear to be "hard-wired" to only work with the C: drive.
  • kyoto kidkyoto kid Posts: 41,260
    edited December 1969

    tjohn said:
    Kyoto Kid said:


    ...yes.

    There was someone on the update thread who mentioned that he ended up with two versions of 4.6 (both .1.17 and .1.33) in different locations in the same folder tree after installing which corrupted everything. That is why I held off installing until I could get this figured out.


    Right. I saw that too and it made me a bit uneasy as well, but there were reassurances from Admins and others so I took the risk.
    I don't know why things glitched for that one user, I haven't seen a post from someone else who had a problem yet.
    ...I just didn't want to be the second one as I have no idea how to clean everything out, including the registry. :ohh:
  • MistaraMistara Posts: 38,675
    edited December 1969

    Kyoto Kid said:
    tjohn said:
    Kyoto Kid said:


    ...yes.

    There was someone on the update thread who mentioned that he ended up with two versions of 4.6 (both .1.17 and .1.33) in different locations in the same folder tree after installing which corrupted everything. That is why I held off installing until I could get this figured out.


    Right. I saw that too and it made me a bit uneasy as well, but there were reassurances from Admins and others so I took the risk.
    I don't know why things glitched for that one user, I haven't seen a post from someone else who had a problem yet.

    ...I just didn't want to be the second one as I have no idea how to clean everything out, including the registry. :ohh:


    wuh ohs - containment breach, we'll haz to jettison the cores capn

  • MistaraMistara Posts: 38,675
    edited December 1969

    tjohn said:
    Frank0314 said:
    Misty Whisky said:
    woot Saturday night. wilder with hot cocoa and marshmallows.

    row row row your boat ... -is the song code for a sex thing?

    That sounds good


    The hot cocoa w/marshmallows or the "sex thing"? :)

    ... merrily, merrily ... , high on marshmallows :wow:

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Misty Whisky said:
    ,18?


    i installed .17 just a few weeks ago.


    meh, fallback gallery form doesn't work in safari. upload button doesn't do anything.

    Test for HTML5 functionality here http://html5test.com/index.html

  • ps1borgps1borg Posts: 12,776
    edited December 1969

    chohole said:
    Misty Whisky said:
    ,18?


    i installed .17 just a few weeks ago.


    meh, fallback gallery form doesn't work in safari. upload button doesn't do anything.

    It needs an up to date Browser that can read HTML 5

    Safari does but functionality has changed the past couple of years....

    s.png
    621 x 259 - 28K
  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Kyoto Kid said:
    ps1borg said:
    Kyoto Kid said:
    ...found another cool looking Australian Sports car.


    Crikey, there were some neat designs from your neck of the woods.


    Love the Goggo carryalls as well. Way cuter than the VW microbus.

    Check out the Eureka sports volkswagon :lol:


    ...nice. Is that on the old air cooled chassis?

    I still have a huge soft spot for the older styles though.

    Getting on for fifty years old...

  • starionwolfstarionwolf Posts: 3,670
    edited December 1969

    I need to upgrade my copy of Opera.

    opera.jpg
    613 x 237 - 25K
  • MistaraMistara Posts: 38,675
    edited November 2013

    ps1borg said:
    Misty Whisky said:
    ,18?


    i installed .17 just a few weeks ago.


    meh, fallback gallery form doesn't work in safari. upload button doesn't do anything.

    Test for HTML5 functionality here http://html5test.com/index.html

    oh dear.

    oh well, as far as i can tell, i have the latest safari for windows. it works for the important stuff, like the store. :)

    untitled1.jpg
    905 x 483 - 109K
    Post edited by Mistara on
  • ps1borgps1borg Posts: 12,776
    edited December 1969

    Misty Whisky said:
    ps1borg said:
    Misty Whisky said:
    ,18?


    i installed .17 just a few weeks ago.


    meh, fallback gallery form doesn't work in safari. upload button doesn't do anything.

    Test for HTML5 functionality here http://html5test.com/index.html

    oh dear.

    oh well, as far as i can tell, i have the latest safari for windows. it works for the important stuff, like the store. :)

    test.png
    662 x 135 - 18K
    version.png
    279 x 194 - 26K
  • DanaTADanaTA Posts: 13,265
    edited December 1969

    Dana

    html5test.jpg
    1284 x 610 - 95K
    html5test.jpg
    1284 x 610 - 95K
  • DanaTADanaTA Posts: 13,265
    edited December 1969

    Damn it! The first time I tried to post without any text...it said the message was empty, and it said no files were listed. So I attached the image again...and it came up twice. :-/

    Dana

This discussion has been closed.