Loading...
> >

Llola Lane’s RENDER A MONTH Challenge 2018 CLOSED

1…2526272830

Comments

  • xmasrosexmasrose Posts: 1,403

    I wonder what will be the challenges for next year?

  • SimonJMSimonJM Posts: 5,982

    And my quick go ...

  • deeleelaw57deeleelaw57 Posts: 1,478

    Do the training wheels mean your learning to fly? If so, good luck kitty and another render well done.

  • SaphirewildSaphirewild Posts: 6,668

    I am wondering the same thing!!

  • SimonJMSimonJM Posts: 5,982
    deeleelaw57 said:

    Do the training wheels mean your learning to fly? If so, good luck kitty and another render well done.

     

    Saphirewild said:

    I am wondering the same thing!!

    They are an essential part of his plan to take over the universe, muahahAHAHAHA ooops, did I say that out loud? cheeky

  • isidornisidorn Posts: 1,601
    edited December 2018
    SimonJM said:
    deeleelaw57 said:

    Do the training wheels mean your learning to fly? If so, good luck kitty and another render well done.

     

    Saphirewild said:

    I am wondering the same thing!!

    They are an essential part of his plan to take over the universe, muahahAHAHAHA ooops, did I say that out loud? cheeky

    You know your head is big when you're eclipsing the moon. cheeky

    Hello everyone! I've (again) missed most of what's been going on on the forum for the last couple of months. Yesterday I managed to do some catching up and realized that a necklace I was using in a render I'm setting up works with this month's theme here, so I did a close up portrait render of my model (Mei Lin 8) that I use in the scene. If anyone wonders where Ducky is, he's on the floor and thus can't be seen in this close up.

    MeiLin8Face.jpg
    2500 x 2000 - 1M
    Post edited by isidorn on
  • deeleelaw57deeleelaw57 Posts: 1,478

    Very nicely done isidorn and I would add one of my favorite models.

  • Llola LaneLlola Lane Posts: 9,344
    mori_mann said:

    Nice crescents so far :) Here's mine. A tad boring, perhaps, but who's counting? :D

    Moongazing

     

    Could hardly leave Isabelle out. She is, after al a worschipper of a moon goddess :)

    WOW gorgeous Mori... I have that set on my wish list (sighs)... along with 50 other things.. lol.  Thanks oodles for sharing!

  • Llola LaneLlola Lane Posts: 9,344
    Linwelly said:

    I wasn't that inspirational with the shape, so I went for the moon as well, but I chose chinese mythology: Chang'e and Yuyu. Chang'e is a moon godess who can either turn into a rabbit herself when on erth or has a companion rabbit which then is called Yuyu (Jaderabbit). You might come across those names in context with the chinese moon lander (there is one on the moon already by that name with nr 3) which is now going to land on the dark side of the moon, by the number 4. enough ramble, here's the image:

     

    Thanks for sharing Linwelly... and the lesson... I love hearing about myths from around the world!  Always fascinating.

  • Llola LaneLlola Lane Posts: 9,344
    edited December 2018

    ok Gang... Christmas is over so I have no excuse for not making a CRESCENT render... I looooooove mirrorzzzzzzzzz... Here it is...

    Crescent Moon Sword Mirror

    How many do you count???? 

    CRESCENT SWORD 3minute render DONEe SIGN.jpg
    1094 x 1094 - 261K
    Post edited by Llola Lane on
  • Llola LaneLlola Lane Posts: 9,344
    SimonJM said:

    And my quick go ...

     

    Ha.. I didn't realize there was a page 20... duhh... lol.  Well done Simon... haaaaaaaaaaang on kittehhhhhhhhh!!!

  • Llola LaneLlola Lane Posts: 9,344
    isidorn said:
     

    Hello everyone! I've (again) missed most of what's been going on on the forum for the last couple of months. Yesterday I managed to do some catching up and realized that a necklace I was using in a render I'm setting up works with this month's theme here, so I did a close up portrait render of my model (Mei Lin 8) that I use in the scene. If anyone wonders where Ducky is, he's on the floor and thus can't be seen in this close up.

     

    You get credit for 2 months with that necklace isidorn   ... Star AND Crescent.. ;)  Thanks for sharing.. Glad you were able to post a render this month.

  • Llola LaneLlola Lane Posts: 9,344

    Merry Christmas and Happy Holidays everyone!  I suppose before the end of the year I need to pick a RANDOM day to fill you all in on next years' challenge... That is if everyone still wants to do one?  Are you all game?  Please let me know. 

  • isidornisidorn Posts: 1,601
    Llola Lane said:

    ok Gang... Christmas is over so I have no excuse for not making a CRESCENT render... I looooooove mirrorzzzzzzzzz... Here it is...

    Crescent Moon Sword Mirror

    How many do you count???? 

    I count four? And the rest is mirror images. Not going to try count all of those! cheeky Very cool mirror effects. Well done!

    I'm looking forward to next year's challange. Hopefully I'll be able to participate on a more regular basis that I've done this year.

  • xmasrosexmasrose Posts: 1,403

    @SimonJM Wonderful idea! Love it!

    @isidorn Great necklace and beautiful portrait!

    @Llola Lane cool image! how many mirrors to create it? Too many reflections for my brain !!!!!!

    Like I said a couple of days ago I am looking forward to next year challenge.

     

  • LinwellyLinwelly Posts: 5,947

    @Llola, very clever, I'm sure there is only one original sword, the rest are mirror images

    @Simon, nice reference :D well done

    @isidorn, welcome back to the madness! I missed you! nice render there.

    Thanks a lot to everyone for the nice comments, and i would certainly be in for next years challenges!

     

  • Llola LaneLlola Lane Posts: 9,344
    edited December 2018

    ding.. ding.. ding... We have a WINNER... Linwelly is correct... only 1 sword ... the rest are mirrors. 

    The sword is in a BOX with mirrored sides... If you are gonna try playing with mirrors... don't forget to turn up the MAX RAY TRACE DEPTH when you render... The default is 2 and you will only see 6-8 swords... I turned it up to 16 for mine... but if I had turned it up to the max of 32... my computer would have probably started smokin'.. lol

    Post edited by Llola Lane on
  • Llola LaneLlola Lane Posts: 9,344

    ok gang... I will pick a RANDOM date before the year is over to announce next year's challenge... and I DO mean challenge!

  • mach25mach25 Posts: 256
    edited December 2018

    thanks xmasrose(aka tulipe)

    Simonjm, where do I buy such a flying bike?would be best view up there running slalom between fireworks new years eve,pic

    isidorn, very nice pic, I thought its was because of new years eve ducky have to duck from all there fireworks

    LLola great sword mirrorscene,nobody thought of crescent and hammer flag yet

    challenge like enter Vicky in hexadecimal hard?smiley

    I have decided on try to make a real mooncake,but no real baker so I gonna make it by premade "cake bottom", and found there is chocolate,

    meringue

    ,and ordinary cake because I also wanna know how it taste like

    Post edited by mach25 on
  • SaphirewildSaphirewild Posts: 6,668

    Yay can not wait till you announce them for next year!!

  • deeleelaw57deeleelaw57 Posts: 1,478

    Well done Llola Lane.

    You said a single crescent sword in a box with mirrored sides. The top and bottom of the box must be normal glass or you would not be able to see the original sword. Because of the angle of the box, it would produce 4 sword reflections in eight directions on the same level for a total of 32 reflections plus the original sword and it's 4 reflections. This would be 36 reflections and the original sword at the main level. The mirrors would reproduce the 36 reflections plus one reflection from the original sword 3 levels below and 3 levels above the main level. This would total 37 reflections for 6 levels, 36 reflections for 1 level and 1 original sword. A total of 258 reflections and 1 original sword. Or as Linwelly put it 1 sword and a bunch of reflections

    Great render and great math tease.

    Can't wait to start on January.

  • mach25mach25 Posts: 256
    edited December 2018
    deeleelaw57 said:

    Well done Llola Lane.

    You said a single crescent sword in a box with mirrored sides. The top and bottom of the box must be normal glass or you would not be able to see the original sword. Becausee angle of the box, it would produce 4 sword reflections in eight directions on the same level for a total of 32 reflections plus the original sword and it's 4 reflections reflections. This would be 36 reflections and the original sword at the main level. The mirrors would reproduce the 36 reflections plus one reflection from the original sword 3 levels below and 3 levels above the main level. This would total 37 reflections for 6 levels, 36 reflections for 1 level and 1 original sword. A total of 258 reflections and 1 original sword. Or as Linwelly put it 1 sword and a bunch of reflections

    Great render and great math tease.

    Can't wait to start on January.

    I also thought about you can split a rod only to atom level,the same about a mirror render,but the limit is a single pixel ,and my diamond render was maxed out,now I think it would be good to have some formula that you type in diamond size or sword size and out you get onlyneeded racetrack depth, small diamond = few racetraces, beyond that makes almost no difference at the cost of loads of computer power/unnecessary high rendering times

    Post edited by mach25 on
  • Llola LaneLlola Lane Posts: 9,344
    deeleelaw57 said:

    Well done Llola Lane.

    You said a single crescent sword in a box with mirrored sides. The top and bottom of the box must be normal glass or you would not be able to see the original sword. Because of the angle of the box, it would produce 4 sword reflections in eight directions on the same level for a total of 32 reflections plus the original sword and it's 4 reflections. This would be 36 reflections and the original sword at the main level. The mirrors would reproduce the 36 reflections plus one reflection from the original sword 3 levels below and 3 levels above the main level. This would total 37 reflections for 6 levels, 36 reflections for 1 level and 1 original sword. A total of 258 reflections and 1 original sword. Or as Linwelly put it 1 sword and a bunch of reflections

    Great render and great math tease.

    Can't wait to start on January.

    LOL.. too much math for me... I'll take your word for it.  ;)

  • mori_mannmori_mann Posts: 1,152
    edited December 2018

    Thanks all :) And even more crescents, all of them fun and shiny :D

    As for another year of challenges.. I'm game :D

    Post edited by mori_mann on
  • nattaruknattaruk Posts: 535

    There have been wonderful, inventive and evocative crescent renders. Here's my rather mundane, everyday effort.

    (3Delight render. Model is Alexandra 8 with HD Add-on)

    I'm ready for next years challenge!

  • deeleelaw57deeleelaw57 Posts: 1,478

    Great render in my opinion. It is really bad when your mundane everyday effort is so much better than my best effort.

  • mach25mach25 Posts: 256

    its very nice Nattaruk and you find an inventive way of make a crescent, catching the right moment in our everyday life when we drink coffee without noticing what shapes we have around us,we just need more coffee to wake up to pay attention to detailsyes

  • Llola LaneLlola Lane Posts: 9,344
    nattaruk said:

    There have been wonderful, inventive and evocative crescent renders. Here's my rather mundane, everyday effort.

     

    (3Delight render. Model is Alexandra 8 with HD Add-on)

    I'm ready for next years challenge!

    awesome artwork nattaruk ... I'm still loving that skin.  Thanks for sharing!

  • Llola LaneLlola Lane Posts: 9,344

    Ok Gang... A new year is upon us shortly...  I have not counted all the wonderful renders for the challenge this year but we posted 30 pages of art!!!!  Well done everyone!

    I've picked this RANDOM date to give you the link for next years challenge for those of you that like to start early.  
    https://www.daz3d.com/forums/discussion/299501/llola-lane-s-render-a-month-challenge-2019

    Please DO NOT post til it's the new year for you!  ENJOY the new challenge... See you next year!!!

  • LinwellyLinwelly Posts: 5,947

    Thank you Llola, sounds like fun! Have a wonderful start into 2019!

Sign In or Register to comment.