Let's appreciate/discuss today's new releases - ongoing thread

11617192122100

Comments

  • mdingmding Posts: 1,243

    Like the https://www.daz3d.com/oso-eliandra-hair-for-genesis-9 from yesterday, here on G2F (click to enlarge):

     

    Also love the promopics, especially the atmosphere of the below one. Those images show many different subjects, very creative!

     

  • TimbalesTimbales Posts: 2,332
    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,204

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I have worn short loose jumpers over untucked blouses like that 

  • Richard HaseltineRichard Haseltine Posts: 100,781

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I thought it looked quite reasonable, certainly more plausible (for certain groups) than many outfits.

  • TimbalesTimbales Posts: 2,332

    WendyLuvsCatz said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I have worn short loose jumpers over untucked blouses like that 

    I understand the concept, but the details and construction don't align with any real world clothes I have seen - the collar and cuffs especially. The lower hem of the jumper seems to be floating and the uneven front to back is a choice. 

  • nemesis10nemesis10 Posts: 3,417
    edited May 2023

    Timbales said:

    WendyLuvsCatz said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I have worn short loose jumpers over untucked blouses like that 

    I understand the concept, but the details and construction don't align with any real world clothes I have seen - the collar and cuffs especially. The lower hem of the jumper seems to be floating and the uneven front to back is a choice. 

    I think it is an oversize men's dress shirt over jeans with a sweater (jumper?) on top.  You can see the combo here (https://realtakai.com/products/rt-no-5246-knitted-quarter-button-up-shirt-sweater).  In my neck of the woods, Northern California coast, the lood would be remarkably unremarkable.

    Post edited by nemesis10 on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,204
    edited May 2023

    my jumpers often end up stretched and loose at the ribbed hem and shirts/blouses, uhm loose and blousy many lower in front too

    it's admittedly a dishevelled look

    Post edited by WendyLuvsCatz on
  • TimbalesTimbales Posts: 2,332

    nemesis10 said:

    Timbales said:

    WendyLuvsCatz said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I have worn short loose jumpers over untucked blouses like that 

    I understand the concept, but the details and construction don't align with any real world clothes I have seen - the collar and cuffs especially. The lower hem of the jumper seems to be floating and the uneven front to back is a choice. 

    I think it is an oversize men's dress shirt over jeans with a sweater (jumper?) on top.  You can see the combo here (https://realtakai.com/products/rt-no-5246-knitted-quarter-button-up-shirt-sweater).  In my neck of the woods, Northern California coast, the lood would be remarkably unremarkable.

    Yeah, this is a great version of that look: 

    https://www.daz3d.com/dforce-hnc-v-neck-knit-outfits-for-genesis-81-males

     

  • barbultbarbult Posts: 24,240

    Timbales said:

    Yeah, this is a great version of that look: 

    https://www.daz3d.com/dforce-hnc-v-neck-knit-outfits-for-genesis-81-males

    So much better than the new offering! 

  • xyer0xyer0 Posts: 5,926
    edited May 2023

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    The trouser textures have folds and indentations, but the geometry doesn't match them. I don't really mind the baggy top, but the typical Daz Originals-excuse-for-a-collar bugs me.

    Post edited by xyer0 on
  • barbultbarbult Posts: 24,240
    xyer0 said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    The trouser textures have folds and indentations, but the geometry doesn't match them. I don't really mind the baggy top, but the typical Daz Originals-excuse-for-a-collar bugs me.

    Yes, that collar was the final straw that made me dump the whole bundle. I'd rather spend that same amount on one well made outfit that I'd actually want to use.
  • Re: the sweater over the collared shirt outfits ... I have many IH Kang items but to be honest, I've passed over that particular one any number of times; I don't like it better than today's new version of the outfit, though what I dislike is different between the two. This new bundle is $12.58 in my cart and if I shrug and think better of buying it, this outfit won't be why.

  • doubledeviantdoubledeviant Posts: 1,135
    edited May 2023
    I wish the headband in Beautyworks' Shadow Strike Ninja Outfit was a separate item. Doesn't look great melded into the mask. Also wish the pants and top were separate - or at least the combination item were shown uncovered in a promo and looked like something you could actually put on or take off in RL.

    Might buy it despite its flaws - it certainly has style, and the only other appealing option that I recall is Greybro's Shadow Warrior stuff (which I already bought years ago).
    Post edited by doubledeviant on
  • richardandtracyrichardandtracy Posts: 5,662
    edited May 2023

    I appreciate a good laugh every now and again. So can I share this one:

    Last weekend I bought a new cap (baseball cap) and it cost me a fiver (say $6). So I had to laugh when I saw some electric caps for more than a real one: https://www.daz3d.com/betty-ball-cap-for-genesis-9

    Regards,

    Richard.

    Post edited by richardandtracy on
  • joannajoanna Posts: 1,451

    richardandtracy said:

    I appreciate a good laugh every now and again. So can I share this one:

    Last weekend I bought a new cap (baseball cap) and it cost me a fiver (say $6). So I had to laugh when I saw some electric caps for more than a real one: https://www.daz3d.com/betty-ball-cap-for-genesis-9

    Regards,

    Richard.

    But you're getting many more caps this way. And they fit all (g9) heads! ;) 

  • xyer0xyer0 Posts: 5,926
    edited May 2023

    nemesis10 said:

    Timbales said:

    WendyLuvsCatz said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    I have worn short loose jumpers over untucked blouses like that 

    I understand the concept, but the details and construction don't align with any real world clothes I have seen - the collar and cuffs especially. The lower hem of the jumper seems to be floating and the uneven front to back is a choice. 

    I think it is an oversize men's dress shirt over jeans with a sweater (jumper?) on top.  You can see the combo here (https://realtakai.com/products/rt-no-5246-knitted-quarter-button-up-shirt-sweater).  In my neck of the woods, Northern California coast, the lood would be remarkably unremarkable.

    I really wish I had that outfit with those folds and wrinkles for Daz men. I could probably get close with dForce HnC V-Neck Knit Outfits for Genesis 8.1 Males with different pants and shoes (I'd also have to geometry edit the sleeves so I could use a coat). But the only coat I have close to those is kang1hyun's (became HnC) Genesis Double Breasted. I think his clothes were better before he came to Daz (square shoulders, folds/wrinkles on all sleeves, lots of morphs).

    Double Breasted Coat A by kang1hyun

    Post edited by xyer0 on
  • xyer0xyer0 Posts: 5,926

    barbult said:

    xyer0 said:

    Timbales said:

    I don't understand this shirt and sweater/jumper combo. https://www.daz3d.com/dforce-pop-culture-outfit-for-genesis-9

    The trouser textures have folds and indentations, but the geometry doesn't match them. I don't really mind the baggy top, but the typical Daz Originals-excuse-for-a-collar bugs me.

    Yes, that collar was the final straw that made me dump the whole bundle. I'd rather spend that same amount on one well made outfit that I'd actually want to use.

    lol, though I abhor the high-water pants, I still got the bundle figuring I could piece together something from the lot, and even lengthen the pants once Fit Control is released. 

  • barbultbarbult Posts: 24,240

    xyer0 said:

    lol, though I abhor the high-water pants, I still got the bundle figuring I could piece together something from the lot, and even lengthen the pants once Fit Control is released. 

    I used Mesh Grabber to lengthen one of that PA's other high water pants that I got in a character bundle.

  • jd641jd641 Posts: 458

    richardandtracy said:

    I appreciate a good laugh every now and again. So can I share this one:

    Last weekend I bought a new cap (baseball cap) and it cost me a fiver (say $6). So I had to laugh when I saw some electric caps for more than a real one: https://www.daz3d.com/betty-ball-cap-for-genesis-9

    Regards,

    Richard.

    I like those hats tbh, I used that deals coupon on the hats and got it down to $1.51 so not bad.

    The only thing is that I dunno how to get hair to not poke through so badly. I have Mesh Grabber and that can probably work but applying some type of script for hair hiding would just be a lot faster and easier.

  • https://www.daz3d.com/modular-fences-and-walls

     

    Just gates could be in, though some of the fence types often have none or completely differently styled ones in reality, and you could always put in a metal gate if you have one. Could be an add-on, perhaps (Together with more withered textures and damaged ones, perhaps?).

  • doubledeviantdoubledeviant Posts: 1,135
    jd641 said:

    I like those hats tbh, I used that deals coupon on the hats and got it down to $1.51 so not bad.

    The only thing is that I dunno how to get hair to not poke through so badly. I have Mesh Grabber and that can probably work but applying some type of script for hair hiding would just be a lot faster and easier.

    Don't know if/how well they work with G9, but these are made to help fit hair under hats:

    SY Hat and Hair Helper Genesis 8

    dForce Hair Helper and Knitted Hat
  • xyer0xyer0 Posts: 5,926

    barbult said:

    xyer0 said:

    lol, though I abhor the high-water pants, I still got the bundle figuring I could piece together something from the lot, and even lengthen the pants once Fit Control is released. 

    I used Mesh Grabber to lengthen one of that PA's other high water pants that I got in a character bundle.

    Oh! I'll try that. Thanks, @barbult

  • xyer0xyer0 Posts: 5,926

    bluejaunte's most recent releases look like he is opting for a 3DUniverse niche.

  • caravellecaravelle Posts: 2,455

    xyer0 said:

    bluejaunte's most recent releases look like he is opting for a 3DUniverse niche.

    Oh yes. I am not a particularly big fan of these toony girl characters with their stereotypical grin, so I wonder why more of them are needed...? Especially the grin looks strange here.

  • AllenArtAllenArt Posts: 7,169

    caravelle said:

    xyer0 said:

    bluejaunte's most recent releases look like he is opting for a 3DUniverse niche.

    Oh yes. I am not a particularly big fan of these toony girl characters with their stereotypical grin, so I wonder why more of them are needed...? Especially the grin looks strange here.

    Is she supposed to be toony? She looks realistic to me, just young. :) 

  • bluejauntebluejaunte Posts: 1,902

    I see nothing toony. But hey, still good to hear from you guys. Even though it hurts sometimes. 

  • BarubaryBarubary Posts: 1,211

    xyer0 said:

    bluejaunte's most recent releases look like he is opting for a 3DUniverse niche.

    Their previous character, Skye, was supposed to look a bit more toony, from what I understand (although she still looks less toony to me than a lot of other characters).

    This new one, however, looks pretty realistic to me. Her smile is a bit weird, I gotta say, but then again, having a weird smile is not necessarily unrealistic. I mean, me personally, if I see a picture of myself smiling with my teeth showing, it makes my own skin crawl. 

    I do have a hard time pinning down Maddie's supposed age range, though. I guess I would place her in the small niche between 15 and 30 :)

  • xyer0xyer0 Posts: 5,926

    bluejaunte said:

    I see nothing toony. But hey, still good to hear from you guys. Even though it hurts sometimes. 

    @bluejaunte Mea culpa. I meant no offense. I really thought that was the intent. 

  • GordigGordig Posts: 10,049

    She just looks like a BlueJaunte character to me.

  • caravellecaravelle Posts: 2,455

    AllenArt said:

    caravelle said:

    xyer0 said:

    bluejaunte's most recent releases look like he is opting for a 3DUniverse niche.

    Oh yes. I am not a particularly big fan of these toony girl characters with their stereotypical grin, so I wonder why more of them are needed...? Especially the grin looks strange here.

    Is she supposed to be toony? She looks realistic to me, just young. :) 

    That's right. I meant the others; they are much 'toonier' :-)

This discussion has been closed.