Loading...
> >

UltraScenery - new territory [Commercial]

1…3940424445…100

Comments

  • Norman_RNorman_R Posts: 95
    edited September 2021

    Barbult So I have that. https://www.daz3d.com/iray-alligator-by-am

    000818.jpg
    3840 x 2160 - 6M
    Post edited by Norman_R on
  • barbultbarbult Posts: 24,240

    Norman_R said:

    Barbult So I have that. https://www.daz3d.com/iray-alligator-by-am

    I'm picky. winkToo much body is above the water all along his length. It looks like he is standing in shallow water instead of floating. In the front, only his nostrils should be visible, barely above the water. You might get close if you lower the whole gator. I like your image composition, though!

  • barbultbarbult Posts: 24,240

    Here is where I tried to add alligators, but I didn't post it, because they just don't look right to me. frown

    USC Swamp Hut_001_Camera.jpg
    2000 x 1125 - 2M
  • Norman_RNorman_R Posts: 95
    barbult said:

    Norman_R said:

    Barbult So I have that. https://www.daz3d.com/iray-alligator-by-am

    I'm picky. winkToo much body is above the water all along his length. It looks like he is standing in shallow water instead of floating. In the front, only his nostrils should be visible, barely above the water. You might get close if you lower the whole gator. I like your image composition, though!

    Yes, I know it doesn't look good. Was only intended as an example for the alligator.
  • barbultbarbult Posts: 24,240

    Norman_R said:

    barbult said:

    Norman_R said:

    Barbult So I have that. https://www.daz3d.com/iray-alligator-by-am

    I'm picky. winkToo much body is above the water all along his length. It looks like he is standing in shallow water instead of floating. In the front, only his nostrils should be visible, barely above the water. You might get close if you lower the whole gator. I like your image composition, though!

    Yes, I know it doesn't look good. Was only intended as an example for the alligator.

    Ah, yes. That is the alligator product I bought more recently to get Iray materials. It is the one I used in my image, too.

  • barbultbarbult Posts: 24,240
    edited September 2021

    I pushed and pulled some polygons with Mesh Grabber to get closer to what I want to see with my Alligator.

    USC Swamp Alligator Mod.jpg
    2000 x 1500 - 2M
    Post edited by barbult on
  • davesodaveso Posts: 6,998

    cant the alligator be lowered to only show what you want, and with some rotation? 

  • barbultbarbult Posts: 24,240

    daveso-confused said:

    cant the alligator be lowered to only show what you want, and with some rotation? 

    That didn't work for me. The shape was not what I wanted. For example, the back was too domed.

  • barbultbarbult Posts: 24,240
    edited September 2021

    Here is my new alligator render, inspired by the photo of the gator in the duckeweed.

    USC Swamp Alligator Mod Duckweed_004_Camera.jpg
    2000 x 1125 - 2M
    2010-12-31 DSC_5592.jpg
    3872 x 2592 - 1M
    Post edited by barbult on
  • richardandtracyrichardandtracy Posts: 5,663

    Leads to a varient on the 5yo child's joke question of 'Q) What's Yellow and Dangerous? A) Shark infested Custard' with 'Q) What's Green and Dangerous? A) Barbult's Bayou'.

    That really is so real. Amazing. And if I ever go to Florida (which is unlikely due to heat & humidity being utterly hateful - now Alaska, that's simply gorgeous) I will assume all bits of water have the same properties as Barbult's Bayou.

    Regards,

    Richard

  • davesodaveso Posts: 6,998

    I messed around with the alligator a bit and realized then what you are saying Barbult. It is possible to bend the body, but still not quite in right direction. It also is one huge model, so cannot do much, BUT, if someopne knows how to use the geometry editor, I bet it possible to flatted that body a bit. 
    Here's my quick shot at it...yes, the body still too high. 

    alligator1.png
    1800 x 1440 - 5M
  • barbultbarbult Posts: 24,240

    daveso-confused said:

    I messed around with the alligator a bit and realized then what you are saying Barbult. It is possible to bend the body, but still not quite in right direction. It also is one huge model, so cannot do much, BUT, if someopne knows how to use the geometry editor, I bet it possible to flatted that body a bit. 
    Here's my quick shot at it...yes, the body still too high. 

    It looks better than the original. I used Mesh Grabber to flatten it out some.

  • Doc AcmeDoc Acme Posts: 1,153

    Well frankly, ANYTHING under the water & moving is a cue for me to beat feet!  Just as well. Neighbor was telling what his motion detecting IR camera was catching.

    I bet you could play around some with instancing of duckweed on the critter's head though so it'd be more controllable covered.

    Did have a question or two.  AM's 'Gator is rigged, but the jaw only drops whereas the older Croc only has poses for any mouth activity.  I thought either could only raise their jaws.  Myth? Misinformation?  Modeling/rigging error, or just need to pose more with the head & neck?

    Gator vs Croc.jpg
    1920 x 1080 - 328K
  • pjwhoopie@yandex.com[email protected] Posts: 793
    edited September 2021

    Hmmm....
    https://videos.clipstock.com/s3fs-public/previews/119-0023-01-209-preview.mp4?VersionId=LyDB5tXCjR9uNcQxOBvKy9gIV84O4jxx

     

    Post edited by [email protected] on
  • davesodaveso Posts: 6,998
    edited September 2021

    Doc Acme said:

    Well frankly, ANYTHING under the water & moving is a cue for me to beat feet!  Just as well. Neighbor was telling what his motion detecting IR camera was catching.

    I bet you could play around some with instancing of duckweed on the critter's head though so it'd be more controllable covered.

    Did have a question or two.  AM's 'Gator is rigged, but the jaw only drops whereas the older Croc only has poses for any mouth activity.  I thought either could only raise their jaws.  Myth? Misinformation?  Modeling/rigging error, or just need to pose more with the head & neck?

    AMs alligator only moves its lower jaw open. That is how real alligators do it as well.  

    all open mouth.png
    1800 x 1440 - 775K
    Post edited by daveso on
  • Doc AcmeDoc Acme Posts: 1,153

    Thanks for the verification.  Couldn't imagine Allessandro missing something like that.

  • sandmanmaxsandmanmax Posts: 992

    barbult said:

    daveso-confused said:

    I messed around with the alligator a bit and realized then what you are saying Barbult. It is possible to bend the body, but still not quite in right direction. It also is one huge model, so cannot do much, BUT, if someopne knows how to use the geometry editor, I bet it possible to flatted that body a bit. 
    Here's my quick shot at it...yes, the body still too high. 

    It looks better than the original. I used Mesh Grabber to flatten it out some.

    On the ones without the duckweed, it seems a little more specularity would help, too.  They didn't seem as "wet" as your photos. I'm having similar annoyances with all the dragons.  They just weren't built for dragon-in-your-face panic attacks.

  • barbultbarbult Posts: 24,240
    edited September 2021

    sandmanmax said:

    barbult said:

    daveso-confused said:

    I messed around with the alligator a bit and realized then what you are saying Barbult. It is possible to bend the body, but still not quite in right direction. It also is one huge model, so cannot do much, BUT, if someopne knows how to use the geometry editor, I bet it possible to flatted that body a bit. 
    Here's my quick shot at it...yes, the body still too high. 

    It looks better than the original. I used Mesh Grabber to flatten it out some.

    On the ones without the duckweed, it seems a little more specularity would help, too.  They didn't seem as "wet" as your photos. I'm having similar annoyances with all the dragons.  They just weren't built for dragon-in-your-face panic attacks.

    Could be. Thanks for the observation. I see what you mean. I lit with an HJDRI. Maybe I need to add a photometric light.

    Post edited by barbult on
  • barbultbarbult Posts: 24,240
    edited September 2021

    I tried to improve the specularity of the alligator with a wet geometry shell. Comments??? Suggestions???

    I scattered some water plants on the surface with UltraScatterPro.

     

     

    USC Swamp Alligator Mod wet shell.jpg
    2000 x 1500 - 3M
    Post edited by barbult on
  • Doc AcmeDoc Acme Posts: 1,153

    At Sea HDR's

    Thought I'd ask here first & see where that leads.  Some time back I bought the "Above The Clouds" HDR series and have used them much more than I thought I would frankly. I'd like to find a series like that, but Out at Sea.  I went back to the Clouds site but nothing like that there.  Broadened a Google search some but still no luck.  Maybe something like that needs a rock solid base, but in this day & age of drones & milli-gnathair precision, I'm thinking something like that just might exist.

    Anyone hear of anything like this? Hmmm. Maybe I'll have to run this by a relative who's drone certified & lives in Port Angeles.

     

  • DreamWeeverDreamWeever Posts: 175

    Doc Acme said:

    At Sea HDR's

    Thought I'd ask here first & see where that leads.  Some time back I bought the "Above The Clouds" HDR series and have used them much more than I thought I would frankly. I'd like to find a series like that, but Out at Sea.  I went back to the Clouds site but nothing like that there.  Broadened a Google search some but still no luck.  Maybe something like that needs a rock solid base, but in this day & age of drones & milli-gnathair precision, I'm thinking something like that just might exist.

    Anyone hear of anything like this? Hmmm. Maybe I'll have to run this by a relative who's drone certified & lives in Port Angeles.

     

    Hey Doc, I am not really farmilier with Above the Clouds so went and took a look. After having a hunt round the store the one thing I could thnk of was to cheack out some of Flipmode's sets https://www.daz3d.com/flipmode from memory there is atlest one sea set and maybe others too. 

  • Doc AcmeDoc Acme Posts: 1,153

    Hmm, not quite what I'm looking for, but it's not urgent. Just one of those things I happened to notice:  Sky, Land, but no Sea in isolated shots. Might have to whang something together in HDRLightStudio perhaps.

     

     

  • DreamWeeverDreamWeever Posts: 175

    No worries, if I see anything I'll sing out

  • DreamWeeverDreamWeever Posts: 175
    edited September 2021

    Double post

    Post edited by DreamWeever on
  • DoctorJellybeanDoctorJellybean Posts: 8,464

    barbult said:

    I tried to improve the specularity of the alligator with a wet geometry shell. Comments??? Suggestions???

    I scattered some water plants on the surface with UltraScatterPro.

    Going by your cloudy sky, maybe a bit too shiny? This one appears to have similar lighting.

  • DoctorJellybeanDoctorJellybean Posts: 8,464

    No signal (trying to get hold of a breakdown company)

    I just removed the grasses and some plants to make a clearing for a car park.

  • barbultbarbult Posts: 24,240
    DoctorJellybean said:

    barbult said:

    I tried to improve the specularity of the alligator with a wet geometry shell. Comments??? Suggestions???

    I scattered some water plants on the surface with UltraScatterPro.

    Going by your cloudy sky, maybe a bit too shiny? This one appears to have similar lighting.

    Your link doesn't seem to work for me.
  • DoctorJellybeanDoctorJellybean Posts: 8,464

    barbult said:

    Your link doesn't seem to work for me.

    Grrrr .....

    https://static.onecms.io/wp-content/uploads/sites/20/2021/08/31/alligator.jpg

  • Mark_e593e0a5Mark_e593e0a5 Posts: 1,594

    Doc Acme said:

    At Sea HDR's

    Thought I'd ask here first & see where that leads.  Some time back I bought the "Above The Clouds" HDR series and have used them much more than I thought I would frankly. I'd like to find a series like that, but Out at Sea.  I went back to the Clouds site but nothing like that there.  Broadened a Google search some but still no luck.  Maybe something like that needs a rock solid base, but in this day & age of drones & milli-gnathair precision, I'm thinking something like that just might exist.

    Anyone hear of anything like this? Hmmm. Maybe I'll have to run this by a relative who's drone certified & lives in Port Angeles.

     

    Perhaps some products at rendo would fit. There is a a "Lonely Ocean Island" HDR from scienceartnature, featuring an ocean with a beach. And two HDR sets from JeffersonAF titled "Skydome Oceans" and "Skydome Oceans 2". Both are basically just ocean and sky, but rae intended for Bryce (images in JPG format, though).

  • sandmanmaxsandmanmax Posts: 992

    DoctorJellybean said:

    barbult said:

    Your link doesn't seem to work for me.

    Grrrr .....

    https://static.onecms.io/wp-content/uploads/sites/20/2021/08/31/alligator.jpg

    And now I can clearly see why the rounded back is bugging you.  Have you tried using Mesh Grabber?

This discussion has been closed.