Loading...
> >

XTransfer Module 1- Genesis 3 to Genesis 8 Morph Converter (Commercial)

1…1213151718…38

Comments

  • RhaleRhale Posts: 78

    This is crashing Studio on every use: crashes both Daz Studio 4.12.0.86 Public and Beta 4.12.1.16 (MacOS 10.15.1). A partial morph is saved but is distorted (similar to the report by Gordig on page 11).

  • Zev0Zev0 Posts: 7,086
    edited December 2019

    OK the crashing is causing the distortion, we are working on why it crashes. Can I get a copy of your logfile so we can compare against others? Thanks

    Post edited by Zev0 on
  • RhaleRhale Posts: 78

    Cheers for the update, best of luck!

  • TheNathanParableTheNathanParable Posts: 1,044
    edited December 2019

    I. Am. Loving. This.

    XT Kenji 7 with Yuzuru 8's textures, and XT Guy 7 with 3DU's Pace textures.

    XT Kenji 7.jpg
    615 x 751 - 64K
    XT Kenji 7b.jpg
    466 x 704 - 54K
    XT Guy 7.jpg
    625 x 647 - 53K
    Post edited by TheNathanParable on
  • Zev0Zev0 Posts: 7,086

    Oh wow those came out great Nat.yes

  • TheNathanParableTheNathanParable Posts: 1,044
    edited December 2019

    Oh, and I figured I would try some more e-x-t-r-e-m-e shapes, to really put XTransfer through its paces.

    Here we have both 3DU's Pixie and Marcius' TeeRex, both converted to G8M (and using the default G8M textures and G8M basic wear shorts).

    XT 3DU Pixie.jpg
    503 x 789 - 39K
    XT TeeRex.jpg
    621 x 786 - 42K
    Post edited by TheNathanParable on
  • argel1200argel1200 Posts: 758
    Zev0 said:

    To get Jade across all you have to do is favourite this morph.

    Gave that a try and DS crashes at 71%. Last message in the history is:

    Loaded file: PHMEyelashesCurl.dsf

  • Zev0Zev0 Posts: 7,086
    edited December 2019

    At that point, did you force quit it, did studio crash as in close completely, or did you leave it alone..It should get past that point eventually. It actually isn't crashing, its rigging all morphs at that point but it also locks up the status. If it did crash as in close studio then that is another issue, and something we are looking at. We also trying to implement a way so we can see exactly what the script is doing behind the scene.

    Post edited by Zev0 on
  • mclaughmclaugh Posts: 221

    Sorry to report that Xtransfer crashed at 71% and seriously screwed up something in my DS install: attempting to load any G8F figure or any scene containing a G8F figure crashed DS. Deleting the XTransfer folder (recommended upthread) and rebooting appears to have fixed that, so I can load G8F figures again, but there's still a (live) Genesis3 Female Genesis 8 property (which produces a seriously broken character) in the Parameters/Actor/People pane for all my G8F figures. I know I can delete the property from every G8F individually, but is there any way to get rid of it globally?

    Thanks.

  • Zev0Zev0 Posts: 7,086

    Can I see a screenshot of your genesis 8, and also what is being used morph wise via the currently used option? Deleting the Xtransfer folder removes it completely off your G8, so if something is left behind as you describe I need to see.

  • argel1200argel1200 Posts: 758
    Zev0 said:

    At that point, did you force quit it, did studio crash as in close completely, or did you leave it alone..It should get past that point eventually. It actually isn't crashing, its rigging all morphs at that point but it also locks up the status. If it did crash as in close studio then that is another issue, and something we are looking at. We also trying to implement a way so we can see exactly what the script is doing behind the scene.

    Crashes withn a couple minutes. I was able to see the history dialog while the crash dialog was up. Crashed at 2m 10s. 

    I tried changing to Main Street and Full Service and it crashed at 1m 49s on XT_FHM-FWSAJade.dsfI;m not seeing any G3F  XT_ files being created (or at least System.FileName:~XT_* is not finding them). Note: second attempt was from a saved scene that I deleted cameres, outfits, hair, etc. from anf the first attempt today was after a fresg DS start loading Jade from Smart Content.

     

  • Zev0Zev0 Posts: 7,086
    edited December 2019

    You only supposed to convert from a new scene with a default G3. Do not use a pre-existing scene. If it happens in that new scene again please send your log file.

    Post edited by Zev0 on
  • Oso3DOso3D Posts: 15,008

    Genesis Ribbits ( https://www.daz3d.com/ribbits-for-genesis ) -> G3F -> G3M (for some reason it was erroring going Genesis -> G3M so whatever) using GenX2

    Then XTransfer G3M -> G8M.

    I don't have the special stuff to transfer pre G3 textures, so I rummaged through and landed on Giant HD Blue ( https://www.daz3d.com/giant-hd-for-the-brute-8 )

    Not 100% happy with the lighting, but... woo!

    If I were going to tinker more, I'd probably come up with my own JCMs; the belly and neck, predictably, fold badly in some poses.

     

    G8M Ribbits.jpg
    1000 x 1300 - 396K
  • Oso3DOso3D Posts: 15,008
    edited December 2019

    Reptilian 6 -> G3M with GenX, then Xtransfer to take it all the way to G8M.

    I used the Alien-X skin, since it's suitably reptilianish, and I think it came out rather well!

    (The feet are blank, because I think Alien-x uses geograft feet, so... not showing the feet)

     

    G8M Reptilian.jpg
    1000 x 1300 - 327K
    Post edited by Oso3D on
  • Zev0Zev0 Posts: 7,086

    That one came out great!

  • argel1200argel1200 Posts: 758

    Yeah, it's crashing from a new scene as well. 

     

    Zev0 said:

    You only supposed to convert from a new scene with a default G3. Do not use a pre-existing scene. If it happens in that new scene again please send your log file.

    Logs messaged to you.

  • Zev0Zev0 Posts: 7,086
    Thanks I got them.
  • JerifeJerife Posts: 272
    edited December 2019

    Subtle morphs transfer very nicely:

    Here a G8F with OOTs bikini and micromorphs

    You can see it applied in the right figure 

    133 01.jpg
    1424 x 712 - 469K
    Post edited by Jerife on
  • Zev0Zev0 Posts: 7,086

    Jerife I sent you a PM.

  • JerifeJerife Posts: 272

    Can't show here but wonderfuly transfered. Thank you very much

  • frankrblowfrankrblow Posts: 2,052

    Zev0, I replied to your PM and included a screenshot and a compressed file. I may have found a culprit (G3F character) for my problems, but I'll leave you to see if I'm correct or not.

  • JerifeJerife Posts: 272

    You are a genius and your script awesome!

    Here Mabel8 on a G3F garment, Pletaix by Powerage, with and without the Pose Control morph. I injected the morph that comes with the pantie over the G3F base and XTransfered laugh

    134 14 rdx1600.jpg
    3200 x 1600 - 3M
  • mclaughmclaugh Posts: 221

      Can I see a screenshot of your genesis 8, and also what is being used morph wise via the currently used option? Deleting the Xtransfer folder removes it completely off your G8, so if something is left behind as you describe I need to see.

    PM sent.

  • XpiderManXpiderMan Posts: 426

    I installed XTransfer yesterday and after doing one morph, DAZ studio (both 4.12 and it's beta) would suddenly close (crash) while loading any G8M figure. Today I went ahead and renamed the folder where morph was at, along with another product "Character Converter from G3M to G8M" since that was also causing the figures to take a long time to load. I then uninstalled and installed both of the Daz Studios, and now after two minutes or so, the G8M figure loads but it is deformed (see attached). Is there a way to fix this? I already submitted a ticket yesterday, but now being able to load it all deformed is new.

    Thank you in advanced.

    g8m-figure.png
    765 x 715 - 372K
  • Zev0Zev0 Posts: 7,086
    Hi I sent you a PM. Also, Delete the XTransfer folder in Genesis 8 data if there are distortions. That will reset the figure.
  • XpiderManXpiderMan Posts: 426

    Awesome, thank you, Zev0 for the prompt response. I replied back to your PM, which solved the issue. Thanks again for all your hard work.

  • GordigGordig Posts: 10,047

    Got the banner for free Glute Control, so thank you, even though the link isn't working yet.

  • Robert FreiseRobert Freise Posts: 4,439
    edited December 2019
    Gordig said:

    Got the banner for free Glute Control, so thank you, even though the link isn't working yet.

    I just put it in my cart and it worked

    Thanks for the gift Zev0

    Post edited by Robert Freise on
  • In The FleshIn The Flesh Posts: 157
    Gordig said:

    Got the banner for free Glute Control, so thank you, even though the link isn't working yet.

    I was just able to 'purchse' the free Glute Control from my purple banner just now, so maybe it'll work for you now too! 

    Thanks for the gift Zev0, and for the continued support of this product. I'm looking forward to future XTransfer modules.

    Cheers,

    Daniel

  • frankrblowfrankrblow Posts: 2,052

    Thanks for the male glute control, Zev0!

Sign In or Register to comment.