Loading...
> >

Show us your 3Delight renders

1…2223252728…100

Comments

  • LinwellyLinwelly Posts: 5,947
    edited September 2017

    Sven, yuo are really blowing new life into this thread, lovely works, you seem to grasp the 3delight really well, my favorite is the one with the glowing mushrooms. RR is such a neat tool ;)

    Nice one there hascart, lots of details in that and great posing.

    Here is a new one from me, made for Llola Llanes render a month, with postwork in Gimp 2.8

    Entity

    Entity.png
    1500 x 844 - 1M
    Post edited by Linwelly on
  • Sven DullahSven Dullah Posts: 7,621
    hacsart said:

    How's this?

     

    Hey Hacsart! Nice one, the pose is just right, nice expression too!

    Good to see I´m not totally taking over this threadblush

  • Sven DullahSven Dullah Posts: 7,621
    Linwelly said:

    Sven, yuo are really blowing new life into this thread, lovely works, you seem to grasp the 3delight really well, my favorite is the one with the glowing mushrooms. RR is such a neat tool ;)

    Nice one there hascart, lots of details in that and great posing.

    Here is a new one from me, made for Llola Llanes render a month, with postwork in Gimp 2.8

    Entity

     

    Wow thank you Linwelly, and yes I agree about RR, slowly getting the hang of it...

    Nice render too, love the nose of that woman, classic look!

     

  • hacsarthacsart Posts: 2,025

    Here's an experiment with 3d scanned models..

    3d_terrain1_scan_test1.jpg
    1680 x 1050 - 613K
  • Sven DullahSven Dullah Posts: 7,621
    hacsart said:

    Here's an experiment with 3d scanned models..

    That looks really nice, would love to know more about what you did here.

  • Mustakettu85Mustakettu85 Posts: 2,933
    Sven Dullah said:

    Hey Mustakettu, thanks, did not know progressive doesn´t use shading rate. IIRC pixel samples were atleast 10x10. Usually I set them pretty high for stills.

    10x10 is a good number.

    Sven Dullah said:

    The RR3 presets consist of a UE2 which gives the soft shadows and occlusion and a reflective light which gives the bounce light effect. So they are separated. Apparently you have to use them both.

    Oh wow, that's... retro. Kinda like USLK on steroids, it seems.

    Sven Dullah said:

    and increased the emissive strenght instead. Was not sure about if the emissives require shadowsamples as there is no such thing in the surface tab for the RR3 emissives.

    Hmm, if it all works the way I think it does, the "emissives" should be a generic unshaded ("ambient") surface that gets interpreted by the main bounce shader to be, well, "emissive" (since it's not shaded). Does the main RR shader come with its own sampling controls?

    Sven Dullah said:

    It was just a V4 skin on a Genesis 1 with the Daz default shader, nothing fancy, I have used it  with the AoA lights and it has looked good.

    DS Default, okay, and what was the "mode" by chance? The "skin" one may sometimes misbehave.

  • Oso3DOso3D Posts: 15,014

    Stuff I'm working on, Planet Xerian (various morphs/textures for the inhabitants).

    This is a xhomo male (the smaller/prettier one) and xhomo female with 3dl textures.

    (I was reminded by other threads that while SSS sounds awesome, for skin it's often just... not necessary)

     

    Xhomo Figures2 3dl.jpg
    1080 x 1080 - 516K
  • hacsarthacsart Posts: 2,025

    There are a bunch of these 3d scans done by folks and converted to .obj, over at Sketchfab.com, Mots are done from a bunch of photos and use software like Reality Capture fo create the 3d mesh. I import inot Bryce, then correct the orientation for DAz, and e-export.. Add lights, a Skydome and some other pieces, and there you go..

    Sven Dullah said:
    hacsart said:

    Here's an experiment with 3d scanned models..

    That looks really nice, would love to know more about what you did here.

     

  • Sven DullahSven Dullah Posts: 7,621
    Mustakettu85 said:
    Sven Dullah said:

    The RR3 presets consist of a UE2 which gives the soft shadows and occlusion and a reflective light which gives the bounce light effect. So they are separated. Apparently you have to use them both.

    Oh wow, that's... retro. Kinda like USLK on steroids, it seems

    laugh

    Mustakettu85 said:
    Sven Dullah said:

    and increased the emissive strenght instead. Was not sure about if the emissives require shadowsamples as there is no such thing in the surface tab for the RR3 emissives.

    Hmm, if it all works the way I think it does, the "emissives" should be a generic unshaded ("ambient") surface that gets interpreted by the main bounce shader to be, well, "emissive" (since it's not shaded). Does the main RR shader come with its own sampling controls?

    Nope!

    Mustakettu85 said:
    Sven Dullah said:

    It was just a V4 skin on a Genesis 1 with the Daz default shader, nothing fancy, I have used it  with the AoA lights and it has looked good.

    DS Default, okay, and what was the "mode" by chance? The "skin" one may sometimes misbehave.

    Yeah it was the skin shader, I usually use that one, I will try change it to plastic!

    Thanks Mustakettu!

  • kyoto kidkyoto kid Posts: 41,061
    Linwelly said:

    Sven, yuo are really blowing new life into this thread, lovely works, you seem to grasp the 3delight really well, my favorite is the one with the glowing mushrooms. RR is such a neat tool ;)

    Nice one there hascart, lots of details in that and great posing.

    Here is a new one from me, made for Llola Llanes render a month, with postwork in Gimp 2.8

    Entity

    ...really nice.

     

  • kyoto kidkyoto kid Posts: 41,061
    timmins.william said:

    Stuff I'm working on, Planet Xerian (various morphs/textures for the inhabitants).

    This is a xhomo male (the smaller/prettier one) and xhomo female with 3dl textures.

    (I was reminded by other threads that while SSS sounds awesome, for skin it's often just... not necessary)

     

    ...yeah I'm probably going to have to do my SF story in 3DL only because  the main race is feline based and needs a fair amount of hair created in LAMH. . Don't even want to entertain the thought of render times in Iray.

  • LinwellyLinwelly Posts: 5,947
    edited September 2017
    Sven Dullah said:

    Wow thank you Linwelly, and yes I agree about RR, slowly getting the hang of it...

    Nice render too, love the nose of that woman, classic look!

     

    She is Ceridwen for g3females, and yes she's got a lot of class, one of the few figures I use without changes

     

    Thanks a lot Kyoto Kid!

    Post edited by Linwelly on
  • Oso3DOso3D Posts: 15,014

    KK: Yeah... I made a point of alien lifeforms that don't have hair. Heh.

    Unless LAMH Iray ever gets way more functional, I prefer to stick to 3dl with it. (Though I wish in 3dl the shader 'stuck' because I'm always having to switch the shader to one with Occlusion off option)

  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017

    Testing RR3 some more:

    image

    Added light flare in Gimp.

    Thunder River RR3.png
    1800 x 1013 - 3M
    Post edited by Sven Dullah on
  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017

    Nitro or Kryptonite?

    image

    Born to be wild pp.png
    1800 x 1012 - 2M
    Post edited by Sven Dullah on
  • SaphirewildSaphirewild Posts: 6,668
    edited September 2017

    Playing around again with lightings first one Core Lighting sec ond one UE2

    Raven .png
    1145 x 1145 - 1M
    Girls Gone Wild 3Delight Candlebox.png
    1500 x 1875 - 4M
    Post edited by Saphirewild on
  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017
    Saphirewild said:

    Playing around again with lightings first one Core Lighting sec ond one UE2

     

     

    Hey Saphirewild!

    The first one has really nice studio lightning, well done!

    The second one is my favorite though, nice backdrop and posing, but I feel the feet are not really planted to the ground.

    Maybe consider cropping the pic and leave the feet out?

    Is it a backdrop picture or an actual set you used? If it´s a picture you could maybe use a primitive plane as a floor and

    use a shadowcaster to have your characters cast shadows onto the picture. There are some tutorials on the subject.

    Apart from that I like the feel of it very much!

    Oh and maybe some more light coming from the back to make the characters pop out a little more?

    Post edited by Sven Dullah on
  • Sven DullahSven Dullah Posts: 7,621
    Sven Dullah said:
    Saphirewild said:

    Hey Saphirewild!

    The first one has really nice studio lightning, well done!

    The second one is my favorite though, nice backdrop and posing, but I feel the feet are not really planted to the ground.

    Maybe consider cropping the pic and leave the feet out?

    Is it a backdrop picture or an actual set you used? If it´s a picture you could maybe use a primitive plane as a floor and

    use a shadowcaster to have your characters cast shadows onto the picture. There are some tutorials on the subject.

    Apart from that I like the feel of it very much!

    Oh and maybe some more light coming from the back to make the characters pop out a little more?

    Nah don´t listen to me lol, the more I look at it the more I like itsmiley

  • hacsarthacsart Posts: 2,025

    Not sure if I posted this one...

    m6_shadow_m4skin_hdri_base_5.jpg
    1050 x 1050 - 259K
  • kyoto kidkyoto kid Posts: 41,061
    hacsart said:

    Not sure if I posted this one...

    ...nice action shot.  Love the character.

  • timeofftimeoff Posts: 49

    Same bike as one of the earlier posts above I think :)

     

    Madirac roads and rails.png
    1365 x 1024 - 2M
  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017
    timeoff said:

    Same bike as one of the earlier posts above I think :)

     

    Nice render timeoff, and yeah the bike is so cool isn´t it!

    image

    The Biker.png
    1800 x 1012 - 3M
    Post edited by Sven Dullah on
  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017
    hacsart said:

    Not sure if I posted this one...

    Like it, good sense  of motion!

    Post edited by Sven Dullah on
  • Sven DullahSven Dullah Posts: 7,621
    edited September 2017

    A summerscene with the secluded-shoreline and AoA distant + ambient lights.

    Tweaked some stuff as usual.

    FirstBastion makes truly amazing sets!

     

    image

    The Foggy Shore AoA.png
    1800 x 1012 - 4M
    Post edited by Sven Dullah on
  • hacsarthacsart Posts: 2,025

    Nice one! Reminds me of one of the original Bryce science files from Bryce 3.0.. (attached)

    eternal.jpg
    1680 x 1680 - 576K
  • Mustakettu85Mustakettu85 Posts: 2,933
    Sven Dullah said:

    Testing RR3 some more:

    image

    Added light flare in Gimp.

    Lovely waterfall! Where does the mesh come from? Another FirstBastion set?

  • Mustakettu85Mustakettu85 Posts: 2,933
    Sven Dullah said:

    Nitro or Kryptonite?

     

    Motion blur heart So few people seem to use it but it adds so much in terms of dynamics!

  • Mustakettu85Mustakettu85 Posts: 2,933
    Sven Dullah said:
    Mustakettu85 said:

    Hmm, if it all works the way I think it does, the "emissives" should be a generic unshaded ("ambient") surface that gets interpreted by the main bounce shader to be, well, "emissive" (since it's not shaded). Does the main RR shader come with its own sampling controls?

    Nope!

    Oh well. I'm looking at the publicly available documentation and it mentions some sort of mysterious quality presets that "can be applied to either UE2 or Reflective Light" (one but not the other??). And then it says "Try turning off the UE2 for more dramatic renders and speeding up render time". I wonder what "dramatic" means in this context =)
    I mean, I'm truly sorry for all the users like you who have to figure this all out, basically like experimenting with a black box. Unless there is a thread somewhere here where Marshian explains exactly how it all works.

    I went through the black box phase with the UberSurface family, and I shudder a bit looking back at all the work it involved...
     

    Sven Dullah said:

    Yeah it was the skin shader, I usually use that one, I will try change it to plastic!

    Thanks Mustakettu!

    You're welcome! =)

  • Sven DullahSven Dullah Posts: 7,621
    Mustakettu85 said:
    Sven Dullah said:

    Lovely waterfall! Where does the mesh come from? Another FirstBastion set?

    No, it´s a really old set made by Nerd3D, who´s sadly not in the DAZ store anymore. The man is  ingenious, the falls are posable and can be animated,

    you can adapt them to almost any environment.

    I believe Nerd3D still sells his stuff on his own site, haven´t checked lately.

  • Sven DullahSven Dullah Posts: 7,621
    Mustakettu85 said:
    Sven Dullah said:

    Nitro or Kryptonite?

     

    Motion blur heart So few people seem to use it but it adds so much in terms of dynamics!

    Very truesmiley

This discussion has been closed.